When you look up at the sky, you are probably amazed by the beauty of the twinkling stars, which seem so far away...
Well, this journey begins far beyond all the stars you can see.
Our starting point is above our galaxy, the Milky Way, at such a distance that our stars can no longer be told apart individually.
A point totally out of reach in our physical world, as it would take us millions of years to get there.
Yet this is only the beginning of our journey!
From now on, everything you see, even the smallest dot in the distance, will be a galaxy.
This is where stars, like our Sun, are born and die.
There is no point looking for an isolated one here.
And the Universe is filled with Galaxies, to infinity.
Welcome to the deep Universe, far beyond our starry sky.
Introduction to the journey:
Once the 3D model is loaded, you can start the journey.
Setting off from our Milky Way, you will:
discover our neighbor, the Andromeda galaxy, with which we have a date in 4 billion years.
meet some of the Galaxies listed by Charles Messier in his famous catalog.
visit the Virgo Cluster of galaxies, in our Laniakea supercluster.
enter the Coma Berenices cluster of galaxies, on the boundary of Ho'oleilana.
cross the immense Ho'oleilana structure, passing through the Boötes cluster at its center.
end this journey 2 billion light-years from Earth, with a view of the large-scale structures of the Universe.
You can then choose your own destinations to discover neighboring or remarkable galaxies, which always hold beautiful surprises.
You can also move around the Universe as you please, to discover it as if you were there.
Information sheets tell you in which constellation these galaxies can be seen from Earth, how far from us they are, how big they are, and what makes each of them special.
Here is a very large-scale view of the part of the Universe reproduced here, each small dot representing a galaxy.
We are at the tip of the red arrow (our Galaxy, the Sun, the Earth...)
The dotted axis represents the plane of our galaxy's disk.
The Milky Way that we see in the sky is in fact the thickness of this disk. It is magnificent, but it hides the universe from us in this zone of obscuration.
We can see the distant universe above and below this plane, which makes it possible to map galaxies in these zones, thanks to powerful telescopes on the ground or in space.
Shown here are the 56,000 galaxies mapped by the Cosmic Flows team, who are behind the recent discoveries of large structures (Laniakea, Ho'oleilana).
Your journeys will take place within this sphere with a radius of 2 billion light-years.
The Universe goes on like this indefinitely and, what is more, it is expanding...
It all began with the Big Bang, 13.8 billion years ago.
Light appeared 0.4 billion years after the Big Bang.
The most distant galaxies we can see, thanks to the light they emit, are therefore at most 13.4 billion light-years away.
This is our observable universe.
But while the light was traveling to reach us, these galaxies moved away because of the expansion of the universe.
They are calculated to be 46 billion light-years away today.
So we know the makeup of the universe at these distances, since it consists of the most distant galaxies we currently observe.
This is the horizon of the knowable universe.
And beyond it, it goes on without end, and it is reasonable to think that it is identical to the universe we can observe.
In this infinite universe, we do not occupy any particular place: every observer, wherever they are, sees the same thing as we do, galaxies, always.
They thus have the misleading illusion of being at its center.
It is nevertheless extraordinary that we, who are so insignificant in this infinite space, can have such an understanding of it.
Features to discover the universe of galaxies.
Once you click "Start the journey" on the introduction page, you enter the 3D model and the first journey starts automatically.
During any journey, and at any time, you can however:
- pause with ❚❚ or restart with ►
- choose another destination in Travel, with immediate effect.
- mute the sound 🔇 , set it low 🔉 or normal 🔊
You can access detailed information on the galaxies with Info
The sheet of the galaxy of the current destination opens.
From this sheet you can go directly to all the available sheets.
You can also start a journey to the galaxy of the active sheet (Visit)
Finally, additional options are available with 🠝 which opens: Intro : back to the introduction page of the 3D model Names : show / hide the names of the galaxies you can visit Highlight : locate the galaxy clusters and the Messier galaxies Cockpit : feel as if you were in a spaceship ;) Credits : Data sources and how the Universe 3D model was built
Free navigation.
Once a journey is over, you can explore the universe freely. For example, try to find the Sombrero galaxy (M104).
Controls on PC:
- mouse wheel to move forward or backward.
- hold the left button and drag to rotate the 3D universe.
- hold the right button and drag to change the center of the point of view.
You can also zoom automatically onto a galaxy with a left click on its center.
If it can be visited, you switch to automatic mode while approaching it.
The galaxies you can visit are those available in the Travel list
You can identify them on screen by activating 🠝Names
Tips:
Let the first automatic journey run at least once to discover this 3D environment.
Next time you can interrupt it by pausing, and choose another destination in Travel.
At the end of a journey 🠝Names is very useful for finding your way around the universe.
A first click shows the names of the galaxies you can visit, a second one hides them.
For Highlight you need to zoom far out to see the large clusters.
Conversely, you need to be very close to our galaxy to make out the "Messiers"
Any journey can be interrupted with a new choice in Travel, which takes effect immediately.
First of all, I must thank the "Cosmic Flows" project team for the remarkable outreach work they have done.
In particular, the video Cosmography of the Local Universe is obviously the source of inspiration for this model.
Watching it, you feel like going off to visit this universe, which is unfortunately physically completely impossible.
What remains is modeling, and I hope this attempt will interest a few people who share the same desire.
This video, and many others that followed, with the discoveries of Laniakea and Ho'oleilana among others, are hosted on the IRFU CEA Saclay website.
The core members of the Cosmic Flows team are Yehuda Hoffman, Daniel Pomarede, R. Brent Tully, and Helene Courtois.
This model shows galaxies that are up to 2 billion light-years from Earth.
The catalog with the coordinates of these objects is the one made available by Cosmic Flows, version 4, listing nearly 56,000 Galaxies.
It itself integrates data from SDSS, the Sloan Digital Sky Survey.
It is hosted on The Extragalactic Distance Database (EDD)
It is the fruit of a collaboration between the cosmology institutes of the universities of Hawaii, Maryland and Lyon.
The scientific publication on the catalog, Cosmic Flows 4 data, dates from November 2, 2023.
Particular attention has been paid to the 40 Galaxies of Charles Messier's 1784 catalog.
It is a good gateway to discovering our deep universe and, still today, a reference for amateur astronomers.
Completed with remarkable galaxies, a few of them cited in Halton Arp's Atlas of Peculiar Galaxies, they form the list of so-called visitable galaxies, meaning those you can choose as a destination and eventually see in real, high-definition images.
The other galaxies have low-definition, generic images by family (spiral, barred spiral, elliptical, lenticular ...)
All of them are at their true position.
The size of the galaxies is however not to scale, as they would then be invisible, being far too tiny.
This bias is deliberate, so that their beauty can be appreciated.
The images of the galaxies are often breathtaking, and have become more precise in recent years.
They are generally photos taken by the Hubble Space Telescope in collaboration with ESA, the European Space Agency.
The photos were released colorized, to bring out details sometimes invisible to the human eye, and as a result they depart from the true colors.
For the most curious or purist, you can find the raw photos before processing on the Hubble Legacy Archive website.
Other sources are used, such as ESO, the European Southern Observatory, and its VLT. They are given in the sheet of each galaxy.
These photos had to be processed to erase the many stars they contain, because these stars are all nearby: they are in fact part of our Milky Way.
Although magnificent, they would have made no sense in these simulations of extragalactic journeys.
The descriptive sheets of the Galaxies are written from the texts of Wikipedia, NASA, or astronomy websites.
The distances of the visitable galaxies are approximate.
Indeed, the precision of measurements is improving but large discrepancies are sometimes found depending on the methods used.
Constellation maps.
They are used to position the visitable galaxies relative to the constellations visible from Earth.
They come from the reference site on the subject, the International Astronomical Union (IAU).
Missing galaxies were added using coordinates from NASA/IPAC or the CDS Strasbourg.
And which application to use to set all this in motion?
After a lot of research, Three.js turned out to be the best alternative.
Its animation capabilities are far beyond what is needed here, and it can handle the 56,000 objects without slowing down.
It is free to use under the MIT license Copyright @ 2010-2024 three.js
The data to load on opening goes well beyond what is standard for a web page, so you have to wait a little.
It is more an application than a simple page.
Then you have to add "a bit" of time, perseverance and a lot of passion to put all this together into a 3D universe!